Goldfish in the pond
In the first place. conceived as a small pond? If its depth is less than 50 cm, it will quickly heat up, the fish will suffocate from lack of oxygen.…

Continue reading →

Som antitrus dark.
Question som antitrus care about forty people a month. Excited and me In some underwater Kingdom lived a giant Sami antitrus popularly referred to as the — stick. In the…

Continue reading →

Aquarium fish
Fish are the most ancient animals on Earth: they appeared more than half a million years ago. However, the first ocean fish was different from today, as they were deprived…

Continue reading →

Equipment for ponds

Current equipment for ponds and fountains give you the opportunity to complete the project reservoir at various levels of complexity.

Previously, when the device of the reservoir used crushed clay, then began to apply the concrete. In the recent past, concrete constructed ponds of various sizes – both large and not so large. Now in the construction of garden ponds the concrete, as a rule, do not apply – this is a very time-consuming equipment installation and dismantling.

Now in gardening there are two types of materials are ready – made plastic form and flexible insulation materials (PVC film). Before you build a pond from a plastic form you need to submit that visually, the form, in the garden, may be less than the store. In addition, You are limited to finished form. Much more interesting will turn out a cistern from PVC film. The bed of the stream and cascade also vystelite film. The device of the reservoir from PVC film.

Mark on the ground the outline of the pond. Construction begins with the preparation of the Cup and of pattern formation of the future reservoir. The edges of the pond are benches in order to plant them in aquatic plants. With the surface of the pool removed all sharp objects, rocks, roots. The inner surface of the bowl of the pond compacted layer of sand 4 cm to protect the foil on top of the sand lay geotextile fabric. On top of the geotextile laid PVC foil, pressing it inside.The edges of the film crushed stones.

Equipment for ponds and fountains – it is something that is not visible on the face, but it makes the waterfront the way it is seen the surprised guests.

Then gradually fill the pond with water. As the water level will rise, one by one remove the stones without disturbing the tape to gradually descend and cling to the sides and bottom of pits, folds of the maximum level.

The edges of the pond laid out with natural stone, tile, brick, etc. so that they hung over the water by about 5 cm Stones should be sealed with cement mortar. The gaps between the stones are filled with stone chips, completely covering the edges of the film.

Then the pond and its banks are decorated with stones and plants.

Only selected high quality and efficient equipment for pools and equipment for ponds and fountains provides a guarantee for long life and aesthetics of your pond.

Aquarium marine or freshwater
Before every novice aquarist that decided to save on diving and make your home a magical underwater world, the question is: marine aquarium or freshwater. On the one hand, freshwater…

...

The inhabitants of the sea
In a note to privodyatsya folk omens associated with the inhabitants of the sea. About 15 hours before the storm jellyfish hiding in the rocks; tiny crustaceans called sea fleas,…

...